DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Straight pull spoke blanks - Nipples sold separately

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Trainer ready. Keep the ride going by putting your Cannondale on a trainer with the 2-in-1 trainer axle. Where it thrives: The open road, on the trainer What it's built for: Versatility, convenience Highlights: - Fit your Cannondale road bike to any indoor trainer Removable end caps for outdoor riding - Compatible with Cannondale road bikes that utilize Speed Release dropouts

Trainer ready. Keep the ride going by putting your Cannondale on a trainer with the 2-in-1 trainer axle. Where it thrives: The open road, on the trainer What it's built for: Versatility, convenience Highlights: - Fit your Cannondale road bike to any indoor trainer Removable end caps for outdoor riding - Compatible with Cannondale road bikes that utilize Syntace X-12 dropouts

- Centerlock, 11- speed compatible road hubs - Sealed bearings keep out contamination and dirt while providing a smooth rotation - Skewer included - Spacing / Axle: QR - OLD: 100mm

Sta Tru Front Wheel - Measures 9-inch across, uses a 12-inch tire - Single Wall Rim - Hub/Brake Compatibility: Rim Brake - ISO Diameter: 203 / 12.5-inch - Front Axle: 5/16-inch x 85mm - Rim Width (Internal): 24 mm - Tire Type: Clincher

The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - Weight: starting at 20g for 64 nipples

- Aluminum hubs - Sealed bearing - Nutted - Use: Front - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 100mm - Bearing Type: Sealed

Shimano XT FH-M8010/M8000 Rear Hubs. - Double contact bearing seals - Super polished bearing races for low friction rolling - Shimano Quick-engagement freehub - Not compatible with Shimano 11-Speed Road cassettes - Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability - Center Lock disc brakes provide reliable braking power (lockring sold separately)

- Aluminum hubs - Sealed bearing - Nutted - Use: Front - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 100mm - Bearing Type: Sealed - Hole Count: 36

- Aluminum hubs - Sealed bearing - Nutted - Use: Rear - Gears: Flip-flop singlespeed freewheel - Drilling: 36H - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 110mm - Bearing Type: Sealed

- Nutted aluminum BMX hubs with cutout flanges for aesthetics and weight savings - Sealed bearing for improved performance and longevity - Use: Front - Drilling: 36H - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 100mm

- Nutted aluminum BMX hubs with cutout flanges for aesthetics and weight savings - Sealed bearing for improved performance and longevity - Use: Rear - Gears: Flip/flop singlespeed freewheel - Drilling: 36H - Axle: 3/8-inch - Material: Alloy - Brake Type: Rim - OLD: 110mm

With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance

Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Purchase our Kid Trailer axle for your bike. and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - This axle is specifically designed to fit the 142/148 hub standard Surly MDS or Gnot Boost bikes. - The derailleur end of our axle is internally threaded and will use the bolt from your stock Surly axle. The disc brake side of our axle has an engineered mount for your trailer hitch. That mount has been permanently attached to the axle. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. The threads are M10x1 (metric). - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

- 42mm DEEP DISH sleeved and pinned rim - Powder coated (PC) or Anodized finish(Ano) dependent on color - Available with Machined or Non-Machined sidewall - 760g

• Aluminum hub body • Quick release • 100mm OLD • 20, 24, 28, 32, and 36-hole spoke drilling • Black or Silver

Sta-Tru Double Wall Rear Wheels. - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

Maxle Ultimate Lever Assembly - Fits Maxle Ultimate B1 - Includes lever section only - Suitable for suspension forks

This wide rim tackles bumpy sections and holds up to hard hits. Enjoy the long rides! The sleeved aluminum gravel rim is the ideal choice for riding over gravel, roots, or small obstacles on unpaved paths. The robust, all-round rim, with its inner width of 24mm and its wide knobby tires up to 53mm, is suitable for various purposes and provides great comfort.

The reliable rim with an ideal price-to-performance ratio! The jack-of-all-trades of road rims: light, wide, and with an ideal price-to-performance ratio. The R 460 works perfectly with wide tires and will deliver many unforgettable rides on the road thanks to its reliability.

The reliable rim with an ideal price-to-performance ratio! The jack-of-all-trades of road rims: light, wide, and with an ideal price-to-performance ratio. The R 470 works perfectly with wide tires and will deliver many unforgettable rides on the road thanks to its reliability.

This rim is your robust and reliable companion for all rides. The R 500 supports your riding, day-in and day-out, over thousands of kilometers, all at an unbeatable price-performance ratio.

Replacement freehub body for Vantage and Trail non 2-piece V2 Ritchey hubs. - Shimano Mountain 10-speed

The Box One Rims feature a double-walled, eyeleted, low-profile design optimized to be both lightweight and durable! We offer these in both brake and brake-less variants. You’ll have a clean and sleek wheel build with rim brake tracks as needed. FEATURES - Low Profile Design - Optimized Internal Geometry - Machined Brake Track IMPORTANT NOTES Brake-less variants do not have a brake track and therefore are not designed to be used with rim brakes! They are to be used as front or rear rims with disc brakes ONLY! COMPATIBILITY - Box One XS Mini Carbon 1" alloy steerer 20" x 10mm fork - Box One Harmonic Expert Hubset 28h - Box Three Expert Hubset 10mm 28h - Box One Stealth Expert 10mm Front Hub 28h - Box One Stealth Expert 10mm Rear Hub 28h

The Box One Rims feature a double-walled, eyeleted, low-profile design optimized to be both lightweight and durable! We offer these in both brake and brake-less variants. You’ll have a clean and sleek wheel build with rim brake tracks as needed. FEATURES - Low Profile Design - Optimized Internal Geometry - Machined Brake Track IMPORTANT NOTES Brake-less variants do not have a brake track and therefore are not designed to be used with rim brakes! They are to be used as front or rear rims with disc brakes ONLY! COMPATIBILITY - Box One XS Mini Carbon 1" alloy steerer 20" x 10mm fork - Box One Harmonic Expert Hubset 28h - Box Three Expert Hubset 10mm 28h - Box One Stealth Expert 10mm Front Hub 28h - Box One Stealth Expert 10mm Rear Hub 28h

The Box One Rims feature a double-walled, eyeleted, low profile designed optimized to be lightweight and durable! Offered in both brake and brake-less variants, allow for clean and sleek wheel builds that only have rim brake tracks where they need to be.

The Box One Rims feature a double-walled, eyeleted, low profile designed and optimized to be lightweight and durable! Offered in both brake and brake-less variants, allows for clean and sleek wheel builds that only have rim brake tracks where they need to be. FEATURES - Low Profile Design - Optimized Internal Geometry - Machined Brake Track IMPORTANT NOTES Brake-Less variants do not have a brake track and are not designed to be used with rim brakes! These variants can be used as front rims or rear rims with a disc brake ONLY! COMPATIBILITY - Box One X2 Pro Carbon 1 1/8" cro-mo steerer 20" X 20mm fork - Box One Quantum Hubset 36h - Box Two 20mm Front Hub 36h - Box Two 20mm Freewheel Hubset 36h - Box Three Pro 10mm Rear Disc Hub 36h