Shimano Ultegra R8000 Series Chainrings are designed for use with Shimano's 11-speed Ultegra crankset.

Shimano Ultegra 6800 11-Speed Inner Chainrings - Material: Aluminum - Ring Position/Type: Inner

- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Specially designed tooth profiles for improved wear - More durable finish - Bolt Circle Diameter (BCD): 107 BCD - Speeds: 12 - Material: Aluminum

- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - New tooth profiles for improved wear - More durable finish - 94mm BCD

Replace worn out chainrings or change out gearing with SRAM's RED X-Glide Chainrings. These solid rings are crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM RED 22 compact crank, these are the rings for you.

- Road sets include bearings, shields, c-clips and wavy washer for bearing retention/tension - Mountain sets include bearings, shields, c-clips and spacer - Choose ceramic or stainless steel options

KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links

- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options

Surly OD Bottom Brackets - Compatible with 24mm spindles - Moonlander BB fits a 100mm bottom bracket shell, but exterior width conforms to BB121 standard

Gates Carbon Drive CDX Front belt drive rings are crafted with 6061 aluminum and work well for high-mileage touring or rugged off-roading. - Constructed of 6061 aluminum - 11mm pitch - CDX CenterTrack belts, cogs and rings do not interchange with any part of a CDC/CDX MudPort system

As a front lever for your Rival 1 set-up, or paired for single speed adventures, the new Rival brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. SRAM Reach Adjust feature brings near universal fit for riders. - Weight: 260 grams per lever (no cables) - Lever Material: Aluminum - Finish: Black - Adjustment: Reach Adjust

- Super-light chain for use with 10-speed Campagnolo/Shimano/SRAM with Diamond Like Coating for extra durability - Use: Mountain/Road - Size: 1/2 x 11/128-inch - Width: 5.9mm - Weight: 253g - 116 links

- Patented carbon cords offer the tensile strength necessary to provide the smooth, greaseless, long-lasting ride advantage of a belt driven system (up to double the life of chains) - Belt is only compatible with Gates CDX CenterTrack cogs and sprockets Sizing - 108T = 1188mm - 111T = 1221mm - 113T = 1243mm - 115T = 1265mm - 118T = 1298mm - 120T = 1320mm - 122T = 1342mm - 125T = 1375mm - 132T = 1452mm - 250T (tandem) = 2000mm

Zipp's Service Course SL Stem, crafted from 7075 aluminum, features a shape that's strong and lightweight, resulting in a best-in-class 1.85 grams per newton meter of stiffness. That results in no-flex sprints and accelerations. This stem is a favorite of Zipp ambassadors and pro athletes. - Distinctive Zipp cosmetics - Zipp Quickview integrated computer mount available separately - Lifetime warranty

These Shimano-compatible 8-speed shifters feature comfortable ergonomics, easy installation, and durability you can rely on. Whether you're replacing a broken shifter, doing a drop bar conversion, or building from scratch, these well-constructed shifters will do the trick. - Includes cable and housing - Separate, dedicated lever for upshifts and downshifts - Replaceable hood cover and face plate - External shift cable routing for low friction, smooth response and easy cable and housing replacement - Compatible with Shimano 8-speed road systems - 1 x 8-speed left lever has no shifter parts for a clean, dedicated 1x road setup

Next level spin. The forged one-piece design of the SL SpideRing is a handsome piece of engineering and one of the finest front shifting sets available. Where it thrives: The open road, up and down hills What it's built for: Durability, efficiency Highlights: - One-piece technology makes for reduced weight and increased stiffness and durability - X-Sync thick/thin tooth profiles for secure chain management - Eye-catching and unique design

- Replacement urban threadless forks - Accepts up to 40mm tire width - Chromoly construction - 1-1/8" steer tube - Size: 700C - Steerer Type: Threadless - Steerer Length: 300mm - Material: Chromoly - Offset: 45mm - Axle-to-Crown: 405mm - Race Diameter: 30mm - Axle: QR

- Series: SORA - Crank Construction: 2-piece crank construction - Bottom Bracket: BB-RS500, BB-RS500-PB - Chain Line: 43.5 - 9-speed - Four-arm BCD

- Chainrings Included: Yes - Number of Chainrings: Single - Pedal Spindle: 9/16" - Rings: 42-tooth

The bar offers the same compact reach and drop dimensions as the Service Course SL-70 but adds a flattened top section for a natural ergonomic grip on the bar tops and a revised ramp angle for proper fit. The SL-70 Ergo's specially tuned drop shape creates comfortable hand positions with the short reach to control levers vital for race situations. The bar's 128mm drop help puts the rider low and in control without compromising comfort. Whether it's a rider with smaller hands or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible (40, 42, 44cm sizes only) - Lifetime warranty

Wheels Mfg BB86/92 thread together bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm, 92mm, 89.5mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 106g

Pair Shimano's 1x11 XTR chainring with an XTR rear derailleur and experience a simple, light drivetrain with exceptional chain management. A range of chainring sizes lets you customize your drivetrain for any terrain.

- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts

This is Zipp's innovative all-road handlebar, the Service Course SL 70 XPLR. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle—from paved roads onto gravel, mud, dirt, and even single track. The Service Course SL 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Today's riders demand a few things out of their cockpit, whether they are doing a two hour training ride from home or a 200 mile gravel adventure: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops, specifically focusing on two crucial metrics: outsweep and flare. Outsweep is created by rotating the drop below the brake perch outward. Flare is created by rotating the entire drop above the brake perch outward. - Distinctive Zipp cosmetics - 70mm Reach and 115mm drop allow a comfortable hoods position and a shallow drops postion - 5° drop Flare and 11° drop outsweep creates a drops position 6cm wider than hoods - Ergonomic top with 3° backsweep - Lifetime warranty

A 3D-forged, then precision-machined, lightweight, aluminum mountain bike stem in both 31.8mm and 35.0mm models rated for cross country, trail, all-mountain, enduro, and gravity applications. - Blind bolt holes and shaping - Cold-forged and precision-machined - No-gap face plate and clamp area - Stainless hardware

The Dimension Space is designed to fit riders that need a semi & round shape, with "medium-low pelvic rotation/flexibility and wider ischial bone distance. The Special Channel we call "PAS" (wider and deeper) eliminates numbness and reduces the compression of soft tissues, improving blood flow in the pelvic area. The extra 7mm of padding with special density foam and 153mm width ensures better comfort for longer rides. Prologo has created this product for women and men with a greater distance between the ischial bones that therefore require a wider saddle. This saddle is focused on extra comfort for the all-round rider and all genders. - Rail Material: Ti-Rox - Clamp Style: Standard Rails - Material: Synthetic - Length: 245mm - Width: 153mm - Weight: 200g

Eagle range on a drop bar bike? Now that's a party. The Apex Eagle rear derailleur quietly and quickly shifts across our 12-speed Eagle cassettes, while 1x-specific chain retention technology keeps the chain where it needs to be. It's the best of our road and mountain bike innovations in one package. - Compatible with 50T and 52T Eagle cassettes - Works with 12-speed mechanical Apex and Eagle shifters - Use with Eagle chain - Roller Bearing Clutch controls chain tension for consistent shifting - X-HORIZON straight parallelogram design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force - Cage Lock technology makes for fast wheel changes or chain installation

You want your bike to do everything, so you need gears that can do everything. The Apex XPLR derailleur hits the sweet spot of smooth jumps over a big gear range, all with unmatched chain security and the simplicity of a 1x drivetrain. Quietly and quickly shift across our 12-speed cassettes with 44T large cogs, knowing you'll have the gears you need. - Compatible with cassettes with - 44T large cogs - Use with Flattop chain - Works with 12-speed mechanical - Apex and Eagle shifters - Clutch controls chain tension for consistent shifting - X-HORIZON straight parallelogram design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force - Cage Lock technology makes for fast wheel changes or chain installation

The first thing to know about the XX Eagle Transmission chain is that it’s one of the strongest SRAM has ever made. Specifically engineered to optimize Eagle Transmission, this all-new T-Type design features a unique flat top shape that maximizes shifting performance. The chain features a hollow pin design and is finished in a long-wearing, high durability chrome - Long-wearing hard chrome finish - Smooth shift bottom profile for ultimate shifting performance - Hollow pins save precious grams of weight - Includes PowerLock connector

- Large pedal platform - Lower platform height for pedaling stability - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-moly spindle with 8 mm hex wrench mount - Sealed mechanism - SM-SH51 Cleat included - 1.0 mm cleat spacer included - Binding: Dual sided - Cartridge axle - Cleat retention adjuster - Average weight: 342g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

Origin-8's Trekking Crankset is a fine 9-speed compatible mountain bike touring/trekking triple-chainring crankset made of light and durable forged aluminum. It's stiff and has 175mm arms for excellent power transfer, plus it has CNC-machined and ramped and pinned chainrings for smooth and precise shifting. The chainrings are 48-, 38- and 28-tooth.

For nearly three decades, Terry has been working with all levels of riders to solve all types of saddle comfort issues. Introduced in 1999, the Italian-made Butterfly represents the best in all that research and development. This Butterfly Galactic was designed to take comfort up a notch, in addition to giving you a ride that's out of this world. We've engineered it with our largest cutaway, and It comes as a limited edition in two color options with reflective ink constellation screen-print on the cover. Hand made by aliens in Italy. - Dura-tek cover with constellation screen-print in reflective ink - Widest cutaway in the Butterfly line up for maximum pressure relief - Length x width: 262mm x 155mm - Weight: 260 grams; 9.3 ounces - Rails: Manganese

The SunRace MX 11-Speed Cassette is a wide-ratio cassette designed for XD driver bodies. - Largest sprocket crafted from A7075 aluminum - Black chrome finish - 460% range - Cassette Body Type: SRAM XD 11/12 Speed - Drivetrain Speeds: 11 - Weight: 502 g

• Chromoly construction • V-brake mounts • I.S. disc mount • Fits bikes with 20-inch wheels • Steerer length: 250mm

• Cantilever brake mounts • Chromoly construction • Threadless fork • For 26-inch wheels • 250mm steerer length • 1 1/8-inch steerer diameter

For the stop/start world of cyclocross, Avid makes the inimitable Shorty Ultimate Rim Brake. The ideal balance of power, control and weight, the Ultimates are the choice of pro crossers across the globe. They offer an open design that clears mud quickly while also dishing out serious stopping power and modulation. Just a twist of the in-line cable adjustment knob lets you dial in cable tension, and you can choose between a wide or narrow stance for increased mud clearance or power. And, the Shorty uses standard road cartridge pads for easy maintenance.

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 30mm - Width: 7mm

Terry's FLX saddle offers the best in split saddle engineering. Perfected by our saddle partners at Selle Italia in Italy, this novel approach allows the saddle a small degree of additional flexibility in addition to relief channel comfort. If you find the Terry Butterflies are too wide or too padded, this saddle line is an excellent alternative. We recommend the FLX to elite riders who prefer a lightweight, lightly padded saddle, but with the Terry comfort factor dialed in. - Black leather with screen-printed graphics - Complete cutaway from front to back for added comfort and saddle flexibility - Length x width: 260mm x 142mm - Weight: 228 grams; 8 ounces - Rails: Manganese

Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention. Oval ring shape for riders that want to adjust the power profile of their pedal stroke. - The only oval rings with X-Sync 2 tooth design - Direct Mount Type: Direct Mount SRAM - Drivetrain Speeds: 10, 11, 12 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring - Round or Oval: Oval - Chainline/Hub Compatibility: 141/148 Boost Hubs

It’s undeniable that some riders’ pedaling styles benefit from oval chainrings, so SRAM has engineered the new X-SYNC 2 Oval chainrings to give them the advantage they want. They are the only oval option available with SRAM's genuine X-SYNC 2 teeth profile, so they are the only oval chainrings on the market that are 100-percent optimized for Eagle. - Direct Mount Type: Direct Mount SRAM - Drivetrain Speeds: 10, 11, 12 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring - Chainline/Hub Compatibility: 135/142 MTB Hubs, 150/157 DH Hubs, 170/177 Hubs

Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. - X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Non-Boost 6mm offset

Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. - X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Boost 3mm offset

Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chains - Material: Aluminum

Rugged durability comes naturally to the XX SL Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised. - Light weight and incredibly durable aluminum chainring - 8-bolt direct mount design (Mounting bolts included) - Compatible with SRAM T-Type chains

Designed for use with SRAM's XX SL Eagle power meter, these Thread Mount replacement rings are purpose made for use with the XX SL proprietary spider design. This chainring mount system allows reduced weight without compromising reliability. - Proprietary Thread-Mount design specifically for use with XX SL Power Meter spiders - Light weight and incredibly durable aluminum chainring - Compatible with SRAM T-Type chains - SRAM Threaded chainring tool required for installation (Sold separately - TL0190)

This high-end version of the BB7 has a durable anodized finish and titanium hardware, as well as lighter brake pads. - For use with short cable-pull levers - Includes aluminum-backed organic pads - For use with short cable-pull levers - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No - Weight: 184 g

- An evolution of the MT line, the MT NEXT lineage of brakes is the next generation of braking performance - Carbotecture Body which is a proprietary carbon weave that is nearly twice as strong as carbon laminates, aluminum or magnesium - Carbotecture radial design master-cylinder/lever with 2-finger alloy lever blade and clamp with adjustable reach, flip/flop design, and EBT or Easy Bleed Technology port on reservoir - Double Arch forged 2 piston monoblock caliper design that features anti-heat, anti-drag, anti-squeal, and magnetiX brake pad system for easy pad replacement - Full-hydraulic Magura Royal Blood mineral oil system with a 5-year leakproof warranty - Includes flip/flop front or rear lever, 2000mm pre-bled tubing kit, 74mm post-mount caliper, MC/lever, alloy hardware, tubing shortening bits, and manual

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss EXP 54 Tooth Upgrade Kit

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 54T

The PR 1.0 is set to reset your expectations of comfort. PR stands for Performance Recreation, as this seat is as comfortable on a hybrid bike as it is a full-blown race machine. Our PR saddles feature more padding than the other ISM performance saddles, making them perfect for cyclists that want a softer ride – whether you ride in padded cycling shorts, or regular everyday clothing. Like all ISM saddles, the PR 1.0 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - Comfortable 50-series foam padding - New shape for improved thigh clearance and rider movement - Rear transition hook Commonly used for: - Hybrid bikes - Triathlon bikes - Mountain bikes - Road bikes Tech specs: - Category: Performance Recreation - Length: 245mm - Width: 130mm - Padding: 50-series foam - Rails: Satin Steel - Color: Black

The original rivet saddle has been an inspiration for many and a companion for more. It's a classic design that introduced the concept of comfort in racing saddles. Le Classiche The 0.7mm natural calf skin leather has a smooth surface, a pleasant touch, and is strong and durable. - Rail: Carbon Steel - Shell: Techno-polymer - Foam: Biofoam - Cover: Smooth Leather - Dimension: 283 x 149mm - Weight: 312g

Seated pressure relief for male road cyclists. The new SR Pro Men has a flat contour, yet still is comfortably padded. The overall shape and the relief channel with its deep cut-out perfectly match the male anatomy in a low, forward-tilted riding position typical of road cycling. The highly sensitive perineal area is effectively unloaded, preventing any discomfort. OrthoCell-Inlays in the seating area generate the best possible pressure distribution. The innovative OrthoCell material ensures maximum reset forces and is also more durable and lighter than gel.

Ergon's SR Pro saddle is the choice of world champion Pauline Ferrand-Prevot. With its flat but still comfortably padded shape and relief channel, it fits the female anatomy in a typical racing position. OrthoCell inlays in the soft tissue and sitting area provide optimum pressure distribution, ensuring maximum support while remaining more durable and lighter than gel. Slide flanks help reduce friction when pedaling.

A versatile short-nose gravel-specific saddle with a combination of a ride-compliant, carbon-reinforced nylon shell and Kium hollow rails. A ride-compliant, gravel-specific saddle with a short-nose design and generous ischial support for improved stability. GREATER STABILITY Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, the Argo puts riders in a more planted position, making for greater stability and better weight distribution. The Terra Argo's short length allows riders to sit further forward without placing undue pressure on sensitive areas. It also features an ergonomic cut-out that was developed using detailed pressure analysis and input from medical experts. GRAVEL SPECIFIC SADDLE The Argo is our most versatile saddle shape, with each version suited to different riding styles. As the gravel-specific option, the Terra Argo has been engineered with a compliant shell to offer a certain degree of flexibility. This controlled elasticity absorbs road chatter and vibrations, delivering the comfort needed for long distance riding over unpaved roads. STABILITY AND RESPONSIVENESS To better support the Terra Argo's flexible shell, we used our closed-loop Mobius rail system for increased structural stability and responsiveness. The Terra Argo features a waved profile to provide the lower-back support necessary for long rides and to help riders hold their position while climbing on loose terrain. The same goes for the dropped-nose design which allows riders to rotate their pelvis while pushing forward on the nose for better traction and power transfer. LONG DISTANCE COMFORT The padding is made from fizik's proprietary Type-2 foam formulation, slightly thicker around the ischial sit bones area to support a more upright riding posture. The cushioning is slightly softer and more progressive than the type we use on our racing saddles, providing more long-distance comfort. - Argo: versatile short-nose saddle that encourages stability and relieves pressure on sensitive areas - X3: A combination of a ride-compliant, carbon-reinforced nylon shell and a Kium hollow rail with a high strength-to-weight ratio - Mobius Rail: Closed loop design for added strength and weight distribution - Wingflex: The shell's side edges flex and adapt to a rider's inner leg movement - Type 2 foam: Progressive cushioning, with a lower compression modulus - Terra: All-terrain series designed to take you beyond your boundaries - Intended use: Gravel - Concepts: This is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology and bike-fitting in search of ways to improve cycling performance. - Length: 270 mm - Height at 75mm width: 47 mm - Rail: 7x7 mm

- 4mm compressionless housing - Slick-Lube liner (SL) - Housing length: 50m

- 5mm pre-lubed, Kevlar-lined, compressionless brake cable housing offers smooth, crisp, and reliable braking - 30-meter bulk box for shop use

- 4mm pre-lubed, Kevlar-lined, compressionless gear cable housing offers smooth, fast, accurate, and reliable shifting - 30-meter bulk box for shop use

Origin-8's Cromo-Lite Combo Mountain Fork is seriously versatile. This 4130 chromoly steel fork can be used with 26- or 29-inch wheels, and is suspension corrected for a 100mm 26-inch-wheel fork. With disc mounts and linear-pull brake bosses, even your brake choices are versatile.

Origin-8's Cromo-Lite Combo Mountain Fork is a versatile fork for your 26-inch wheeled bike. Crafted from 4130 chromoly steel, it provides a compliant ride that's suspension corrected for excellent handling. With disc mounts and linear-pull brake bosses, you're set to mount the brakes you want.

- Single speed crankset - Forged AL6061-T6 alloy crankarms - Includes 46 tooth alloy 3/32" chainring - 42mm chainline with 103mm JIS BB - BCD: 130mm - Weight: 620g - Does not include JIS square taper BB